#Bmw ecu reprogramming install
#Bmw ecu reprogramming drivers
#Bmw ecu reprogramming driver

Please take a screenshot of this screen below. If you do chose to read the ECU, there is nothing that can be done with it. There is nothing read on the F Series ECU. Step 4: With your Coding file saved, you now need to upload your information to us so we can create a new stock and tuned file. Export this file and save it to your computer in a place you can find it later. The Coding File is what controls functions of your BMW like lights on, Nav, and other settings. Step 3: Once you lock your cable to the VIN and ECU type, you will need to save your BMW Coding File. If this is not set correctly, you could lock your cable to the wrong ECU type and the cable will not work. The BMW Flash client automatically recognizes the correct ECU for the F Series which is MEVD17.2.G FXX. Step 2: You will now reach the part where the end user cable must be paired to the correct ECU type.

#Bmw ecu reprogramming drivers

If you get an error here such as вЂњunable to locate USB deviceвЂќ, please go back to the top and follow the tutorial to deactivate the device drivers CLICK HERE for tutorial. Make sure your Laptop or Computer is plugged in to a power source for maximum processing power. Make sure the cable is connected to the vehicle and your computer.

#Bmw ecu reprogramming install

Step 1 вЂ“ After you install the program,В launch theВ flash client by double clicking the icon on your desktop. WATCH THIS VIDEO and READ INSTRUCTIONS BELOW We will then find a matching software number for your vehicle and send you back a tuned file. Do a screenshot of STEP 3, then upload that jpg, png, gif, or bmp to us. Connect to your vehicle and go through the prompts. NOTE: TheВ BMW F-Series MEVD17 ECU can only be ID and not read out. Please make sure to disable ANY antivirus software and screensavers for the reading out and flashing process. We do recommend turning off any virus protection, screen savers, and closing all other programs during the writing process.

Email Address вЂ“ Once you read or ID your car, you will need to send us your file ( CLICK HEREВ UPLOAD YOUR FILE ).В We will then return your tuned file to this same email address unless otherwise specified.

It is highly recommended to have a battery tender or battery charger on the car during the read and write process.

Battery Charger REQUIRED вЂ“ Not a trickle charge, but a battery charger.

#Bmw ecu reprogramming driver

If you have a issue with the driver, you can download the driver separately hereВ or follow the driver deactivation process hereВ вЂ“ ( CLICK HERE for tutorial).Each OS does install drivers differently so if you encounter a problem, please contact us. Windows Vista, Windows 7 are acceptable and there are no RAM requirements.Because you need to connect the cable from your car to your computer, a Laptop or Tablet is required and should be plugged in while doing the process. This can be any PC and we haveВ heard of MacвЂ™s working if booted up as a Windows machine. Computer вЂ“ You need to have a computer to install the flash client and connect the USB cable to.The software is available on the download link below. This is program is installed like any program on your computer as a. Flash Client вЂ“ The software application that allows you to read/ID and write via your OBDII port.It uses a mini USB to standard USB cable that plugs into your computer. Flash Cable вЂ“ This is included in your VRTuned Flash Kit.